Optimize your electric skateboard: find out how to adjust the speed display according to your wheels, whether they are Cloudwheels, 8 inches or longboard.
Refine the speedometer
depending on your wheels
In Switcher HP, you can modify the wheelspeed parameter on the remote control so that the speed display is as accurate as possible depending on the type of wheels fitted.
Display only,
not the real speed
This adjustment does not change the actual speed of your skateboard. It only adjusts thespeed displayon the LCD screen of the remote control to match the diameter of your wheels.
The parameter to modify is thewheel speed.
How to access
to the configuration menu
1. Enter the menu
Remoteoff, press both buttons simultaneously. You enter the configuration menu.
2. Line 1: speed unit
Change the speed scale tokm/h or mphvia the dial. Press the right button to move to the next setting.
3. Line 2: wheelspeed
Use the dial to set the value corresponding to your wheels. Press the buttonLEFTto validate and save.
Recommended values
by wheel type
Cloudwheels 165R (rovers)
Wheel speed:74
Cloudwheels 120mm
Wheel speed:78
8-inch all-terrain wheels
Wheel speed:70
6-inch wheels
Wheel speed:64(original initial setting)
90mm longboard wheels
Wheel speed:71
⚠️ Restricted version (road legal)
For restricted skateboards complying with the legislation for riding on public roads, no modification will be possible: access to the general menu is voluntarily locked. You cannot legally modify the firmware settings.
