Street Conversion Kit SoftWheel - Switcher V1, V2, V3
This Street SoftWheel conversion kit is specially designed for Switcher V1, V2 and V3 models, offering an optimal adaptation for urban use. It converts your all-terrain setup into a smooth, high-performance Street configuration suited to paved surfaces.
Complete and easy to install, this pack contains all the essential components to equip your board with parts made for road riding. You will benefit from better responsiveness, livelier acceleration and improved comfort, while keeping the strength and durability of your skateboard.
Kit contents
- 4 SoftWheel 105mm wheels – for better grip and good responsiveness on the road
- 2 belts 265mm – ensure transmission between motor and wheel in a street configuration
- 2 Drive Gear CloudWheel 39T – compatible with CloudWheel wheels, for optimized traction
- 8 608RS bearings without flange and 2 6003RS bearings – high-performance sealed bearings for smooth and durable rotation
Pack contents
SoftWheel 105mm urban wheel for electric skateboard. High quality polyurethane, grip and comfort.
Ride comfortably on uneven urban roads
An excellent compromise between performance and comfort
The SoftWheel 105 mm wheels offer a comfortable alternative to classic urethane wheels. Their generous diameter and shock-absorbing rubber effectively lessen road imperfections (cobblestones, cracks, fine gravel). Ideal for urban longboard use, on asphalt or bike paths.
Note : Their small diameter can cause issues on very flexible boards with low ground clearance (risk of battery pack rubbing), notably on the Xplorer V2.
To help you choose the wheel or tire that best matches your riding style, consult our complete comparison of all available models.
Technical specifications
- Diameter : 105 mm
- Width : 65 mm
- Durometer : 78A
- Weight : Approximately 420 g per wheel
Compatible models
- Xplorer V2
- Xplorer V1
- Switcher V1 / V2 / V3
- Switcher HP V1 / V2
Requires a conversion kit to install.
Contents
- 1 Wheel
Note: Sold individually. Adjust quantity according to the number of wheels to replace.
Belt 265mm for electric skateboard in street configuration. Reinforced HTD 5M transmission belt.
Replace your belt to optimize your board's performance
A key element for smoothness and power
The 265 mm belt ensures a consistent transfer of energy between the motor and the wheel, essential to the performance of your electric skateboard. Designed for use with SoftWheel or CloudWheel wheels, it guarantees progressive acceleration, good motor response and optimal ride comfort.
A simple but essential replacement
With wear from friction, temperature variations and mechanical stresses, belts lose effectiveness. Replacing a worn belt helps maintain smooth transmission, avoid jerks or slipping, and extend the life of the motor and the drive gear.
Configuration
This belt is used in the following configuration for Switcher V1, V2, V3:
-
SoftWheel 105 mm wheels or CloudWheel Rover 110 mm
Compatible models
- Switcher V1, V2, V3
Contents
- 1 Belt 265 mm
Note: Sold individually. Adjust quantity according to the number of wheels to equip. Check your wheel diameter to ensure compatibility.
Drive Gear CloudWheel 39-tooth pulley for electric skateboard. Compatible with CloudWheel Donut wheels.
Replace your Drive Gear for a smooth and responsive street setup
Precise, suitable transmission
The Drive Gear 39T CloudWheel provides optimal transfer of motor power to the SoftWheel or CloudWheel. It is designed to maintain smooth acceleration, immediate response and a controlled glide feel, even at high speed.
Change your drive gear to maintain consistent performance
Exposed to wear, damaged drive gear teeth can cause torque loss, noise or premature belt wear. This 39-tooth model has been designed to easily restore your street configuration to its original state.
Configurations
For Switcher V1 / V2 / V3
-
SoftWheel 105 mm or CloudWheel 110 mm wheels
-
Drive Gear 39T
-
Belts 265 mm
-
608RS bearings without flange & 6003RS
For Xplorer V1 and Switcher HP V1 / V2
-
SoftWheel 105 mm or CloudWheel 110 mm wheels
-
Drive Gear 39T
-
Belts 295 mm
-
608RS bearings without flange & 6003RS
Compatible models
- Xplorer V1
- Switcher V1, V2, V3
- Switcher HP V1, V2
Contents
- 1 Drive Gear 39T
Note: Sold individually. Remember to adjust quantity according to the number of drive gears to replace. Check your wheel diameter and belt size to ensure compatibility.
608RS bearing without flange for electric skateboard. Standard sealed ball bearing.
Replace your bearing to preserve your board's performance
An essential part of your skate
The 608RS bearing without flange (22 x 8 x 6 mm) is essential to maintain smooth rotation between the wheel and the truck. Designed for many Evo-Spirit electric skateboard models, it ensures efficient energy transfer and better stability, whatever your riding style.
Keep your feel by replacing regularly
Over time, bearings wear and lose efficiency. Replacing them regularly prevents excessive friction, extends the life of your board and preserves a smooth glide, even on long rides.
Technical specifications
- Dimensions : 22 x 8 x 6 mm
- Configurations :
- Switcher V1 / V2 / V3 fitted with 90 mm urethane wheels or SoftWheel / CloudWheel
- Xplorer V1, Switcher HP V1 / V2 fitted with 90 mm urethane wheels or SoftWheel / CloudWheel
- Xplorer V1 fitted with 6-inch, 7-inch, 8-inch tires, 130 mm urethane wheel or 140 mm airless and the CNC rim
- Cruz V2, Curve V3 / V4
Compatible models
- Xplorer V1
- Switcher V1 / V2 / V3
- Switcher HP V1 / V2
- Cruz V2
- Curve V3 / V4
Contents
- 1 608RS bearing
Note: Sold individually. Adjust quantity according to the number of wheels to equip. Check your wheel diameter to ensure compatibility.
6003RS bearing for electric skateboard. Sealed ball bearing for Evo-Spirit wheels and pulleys.
Replace your bearing to preserve your board's performance
An essential part of your skate
The 6003RS bearing (35 x 17 x 10 mm) is designed to equip the rims of CloudWheel or SoftWheel on several Evo-Spirit models: Switcher V1, V2, V3, Switcher HP V1, V2 and Xplorer V1. It ensures precise axle support, reduces friction and improves power transmission between motor and wheel. This robust component is essential to guarantee a smooth ride, even on degraded asphalt or during hard cornering.
Keep your feel by replacing regularly
Exposed to wear, moisture and vibrations, bearings lose efficiency over sessions. Replacing them in time helps maintain glide, stability and responsiveness of your board while extending the life of your transmission system.
Technical specifications
- Dimensions: 35 x 17 x 10 mm
- Configurations :
- Switcher V1, V2, V3 fitted with CloudWheel or SoftWheel
- Xplorer V1, Switcher HP V1, V2 fitted with CloudWheel or SoftWheel
Compatible models
Xplorer V1
Switcher V1, V2, V3
Switcher HP V1, V2
Contents
- 1 6003RS bearing
Note: Sold individually. Adjust quantity according to the number of wheels to equip. Check your wheel diameter to ensure compatibility.
