Switch to a Street setup with the CloudWheel Kit for Switcher V1, V2, V3
This CloudWheel conversion kit is designed specifically for the Switcher V1, V2 and V3 models. It easily converts your all-terrain setup into a version optimized for city riding and smooth roads.
Complete and easy to install, this kit contains all the parts needed to equip your board with components suited to Street use. This configuration gives you an excellent balance of speed, comfort and grip, while ensuring strong reliability.
Kit contents
- 4 CloudWheel Rover 110 mm wheels – for better grip and improved comfort on roads
- 2 belts 265 mm – ensure power transfer between motor and wheel in a Street setup
- 2 Drive Gear CloudWheel 39T – compatible with CloudWheel wheels, for optimized traction
- 8 608RS bearings without flange and 2 6003RS bearings – high performance sealed bearings for smooth, durable rotation
Pack contents
CloudWheel Rover 110mm urban wheels for electric skateboard. Openwork design for comfort and unique style.
For a smooth, controlled urban ride
Combine comfort, grip and versatility on all surfaces
The CloudWheel Rover 110 mm wheels are made for demanding riders who want maximum comfort without sacrificing performance in a street configuration. Thanks to their patented DFC (Damping Foam Core) technology, they absorb vibrations far more effectively than classic urethane wheels, delivering a smooth ride even on degraded pavement, cobbles, gravel or uneven paths. The tread profile and anti-slip structure improve grip, especially on wet or dusty surfaces.
To help you choose the wheel or tire that best matches your riding style, check our full comparison of all available models.
Technical specifications
- Diameter: 110 mm
- Width: 64 mm
- Durometer: 76A
- Weight: ~450g per wheel
Compatible models
- Xplorer V2
- Xplorer V1
- Switcher V1, V2, V3
- Switcher HP V1, V2
Requires a conversion kit to install.
Contents
- 4 CloudWheel Rover 110 mm wheels
Note: Sold in packs of 4 wheels (drive gear not included)
If you want to see the version of these wheels compatible with the Cruz V2 or the Curve V4, click here.
265mm belt for electric skateboard in a street configuration. Reinforced HTD 5M transmission belt.
Replace your belt to optimize your board's performance
A key part for smoothness and power
The 265 mm belt ensures constant energy transfer between the motor and the wheel, essential to your electric skateboard's performance. Designed for use with SoftWheel or CloudWheel wheels, it delivers progressive acceleration, good motor response and optimal ride comfort.
Simple but essential maintenance
With wear from friction, temperature changes and mechanical stress, belts lose efficiency. Replacing a worn belt preserves smooth transmission, prevents jerks or slipping, and extends the life of the motor and the drive gear.
Configuration
This belt is used in the following configuration for Switcher V1, V2, V3:
-
SoftWheel 105 mm or CloudWheel Rover 110 mm wheels
Compatible models
- Switcher V1, V2, V3
Contents
- 1 Belt 265 mm
Note: Sold individually. Adjust quantity according to the number of wheels to equip. Check your wheel diameter to ensure compatibility.
Drive Gear CloudWheel 39 tooth pulley for electric skateboard. Compatible with CloudWheel Donut wheels.
Replace your Drive Gear for a smooth, responsive street setup
Precise, adapted transmission
The 39T CloudWheel Drive Gear enables optimal transfer of motor power to the SoftWheel or CloudWheel. It is designed to maintain smooth acceleration, immediate response and a controlled glide feel, even at high speed.
Change your drive gear to keep consistent performance
Subject to wear, damaged drive gear teeth can cause torque loss, noise or premature belt wear. This 39-tooth model is designed to easily restore your street configuration to its original state.
Configurations
For Switcher V1 / V2 / V3
-
SoftWheel 105 mm or CloudWheel 110 mm wheels
-
Drive Gear 39T
-
Belts 265 mm
-
608RS bearings without flange & 6003RS
For Xplorer V1 and Switcher HP V1 / V2
-
SoftWheel 105 mm or CloudWheel 110 mm wheels
-
Drive Gear 39T
-
Belts 295 mm
-
608RS bearings without flange & 6003RS
Compatible models
- Xplorer V1
- Switcher V1, V2, V3
- Switcher HP V1, V2
Contents
- 1 Drive Gear 39T
Note: Sold individually. Remember to adjust quantity according to the number of drive gears to replace. Check your wheel diameter and belt size to ensure compatibility.
608RS bearing without flange for electric skateboard. Standard sealed ball bearing.
Replace your bearing to preserve your board's performance
An essential part of your skate
The 608RS bearing without flange (22 x 8 x 6 mm) is essential to maintain smooth rotation between the wheel and the truck. Designed for many Evo-Spirit electric skateboard models, it ensures efficient energy transfer and better stability, whatever your riding style.
Keep your feel by replacing regularly
Over time, bearings wear and lose efficiency. Replacing them regularly avoids excessive friction, extends your board's lifespan and preserves smooth rolling, even on long rides.
Technical specifications
- Dimensions : 22 x 8 x 6 mm
- Configurations :
- Switcher V1 / V2 / V3 equipped with 90 mm urethane wheels or SoftWheel / CloudWheel
- Xplorer V1, Switcher HP V1 / V2 equipped with 90 mm urethane wheels or SoftWheel / CloudWheel
- Xplorer V1 equipped with 6-inch, 7-inch, 8-inch tires, 130 mm urethane wheel or 140 mm airless and the CNC rim
- Cruz V2, Curve V3 / V4
Compatible models
- Xplorer V1
- Switcher V1 / V2 / V3
- Switcher HP V1 / V2
- Cruz V2
- Curve V3 / V4
Contents
- 1 608RS bearing
Note: Sold individually. Adjust quantity according to the number of wheels to equip. Check your wheel diameter to ensure compatibility.
6003RS bearing for electric skateboard. Sealed ball bearing for Evo-Spirit wheels and pulleys.
Replace your bearing to preserve your board's performance
An essential part of your skate
The 6003RS bearing (35 x 17 x 10 mm) is designed to equip the rims of CloudWheel or SoftWheel wheels on several Evo-Spirit models: Switcher V1, V2, V3, Switcher HP V1, V2 and Xplorer V1. It provides precise axle support, reduces friction and improves power transfer between the motor and the wheel. This robust component is essential to ensure a smooth ride, even on degraded asphalt or in hard turns.
Keep your feel by replacing regularly
Subject to wear, moisture and vibrations, bearings lose efficiency over sessions. Replacing them in time helps maintain rolling, stability and board responsiveness while extending the life of your drivetrain.
Technical specifications
- Dimensions: 35 x 17 x 10 mm
- Configurations :
- Switcher V1, V2, V3 equipped with CloudWheel or SoftWheel
- Xplorer V1, Switcher HP V1, V2 equipped with CloudWheel or SoftWheel
Compatible models
Xplorer V1
Switcher V1, V2, V3
Switcher HP V1, V2
Contents
- 1 6003RS bearing
Note: Sold individually. Adjust quantity according to the number of wheels to equip. Check your wheel diameter to ensure compatibility.
