Switch to Street mode with the SoftWheel Kit for Xplorer V2
This SoftWheel Street conversion kit is designed to adapt your Xplorer V2 Evo-Spirit for smooth, efficient urban use. It lets you transform your all-terrain setup into a Street version perfectly optimized for paved surfaces.
Designed for quick and complete installation, this pack includes all the elements needed to configure your board with components dedicated to road riding. The result: better responsiveness, higher speed, without sacrificing the durability and comfort of your skate. Perfect for the urban rider.
Kit contents
- 4 SoftWheel 105 mm wheels – for better grip and responsive performance on road
- 2 belts 320 mm – ensure transmission between motor and wheel in a Street configuration
- 2 Drive Gear ABEC 45T – compatible with SoftWheel wheels, for optimized traction
- 10 bearings 6900RS – high performance sealed bearings for smooth and durable rotation
Pack contents
SoftWheel 105mm urban wheel for electric skateboard. High quality polyurethane, grip and comfort.
Ride in comfort on uneven urban roads
An excellent compromise between performance and comfort
The SoftWheel 105 mm wheels offer a comfortable alternative to classic urethane wheels. Their generous diameter and shock-absorbing rubber effectively smooth out road imperfections (cobblestones, cracks, fine gravel). Ideal for urban longboard use, on asphalt or bike paths.
Note : Their relatively small diameter can cause issues on very flexible boards with low ground clearance (risk of battery pack rubbing) especially on the Xplorer V2.
To help you choose the wheel or tire that best fits your riding style, check our complete comparison of all available models.
Technical specifications
- Diameter : 105 mm
- Width : 65 mm
- Durometer : 78A
- Weight : About 420 g per wheel
Compatible models
- Xplorer V2
- Xplorer V1
- Switcher V1 / V2 / V3
- Switcher HP V1 / V2
Requires a conversion kit to install.
Contents
- 1 Wheel
Note: Sold individually. Adjust quantity according to the number of wheels to replace.
Belt 320mm for electric skateboard in street configuration. Reinforced HTD 5M transmission belt.
Replace your belt to optimize your board's performance
A key element for smoothness and power
The 320 mm belt is specially designed for the street configuration of the Xplorer V2 equipped with Boosted 105 mm or Rubber 115 mm wheels. It ensures direct and efficient transmission, for responsive acceleration and optimal control.
Simple but essential replacement
Over time, belts wear due to friction, mechanical loads and temperature changes. Regular replacement helps maintain smooth transmission, prevent energy loss, and avoid jerks, slipping or jams caused by a damaged belt. It is also an economical way to protect your motors and drive gear.
Configuration
This belt is used in the following setup for the Xplorer V2:
-
Boosted 105 mm wheels or Rubber 115 mm
Compatible model
- Xplorer V2
Contents
- 1 Belt 320 mm
Note: Sold individually. Adjust the quantity according to the number of wheels to equip. Check your wheel diameter to ensure compatibility.
Drive Gear ABEC 45-tooth pulley for electric skateboard. Compatible with standard ABEC core wheels.
Replace your drive gear for smooth, precise transmission
An essential component for performance
The Drive Gear 45T ABEC provides the direct link between the motor and the wheel. By ensuring efficient power transmission, it helps maintain smooth acceleration, controlled speed and precise response to every input.
Simple replacement, performance restored
Over time, the teeth wear due to friction. Replacing a worn drive gear helps preserve original responsiveness and power, while extending the life of the transmission system.
Configuration
This drive gear is used in the following configuration on Xplorer V2:
-
SoftWheel 105 mm or Cloudwheel Rover 110 mm
-
Drive Gear 45T
-
Belt 320 mm
-
Bearings 6900RS
Compatible model
- Xplorer V2 equipped with CloudWheel Rover 110 mm or SoftWheel 105 mm wheels
Contents
- 1 Drive Gear ABEC 45T
Note: Sold individually. Adjust the quantity according to the number of drive gear to replace. Check your wheel diameter and belt size to ensure compatibility.
Bearing 6900RS for electric skateboard. Sealed ball bearing for Evo-Spirit wheels and pulleys.
Replace your bearing to preserve your board's performance
An essential part of your skate
The 6900RS bearing (22 x 10 x 6 mm) plays a key role in the proper functioning of the Xplorer V2. It guarantees smooth rotation, efficient power transfer and stable riding, even in demanding conditions. Thanks to its robust construction, it reduces friction between the truck axle and the wheel, which improves range and the durability of your board.
Replace your bearings for consistently smooth rolling
Over time, bearings are exposed to shocks, moisture and mechanical wear. Regular replacement helps maintain ride smoothness, optimize energy efficiency and extend the life of your setup. A well-maintained bearing means a more precise, faster board that is always a pleasure to ride.
Technical specifications
- Dimensions : 22 x 10 x 6 mm
- Street configuration:
Plan for 10 bearings 6900RS for a full pack.
- Configuration with CNC aluminium hubs:
Plan for 8 bearings 6900RS + 2 bearings 6000RS (for the drive gear).
Compatible model
- Xplorer V2
Contents
- 1 Bearing 6900RS
Note: Sold individually. Adjust the quantity according to the number of wheels to equip. Check your wheel diameter to ensure compatibility.
See the 6000RS bearings