Optimal performance for your urban commutes
Choose a performance Street setup with this kit equipped with 90 mm red urethane wheels, specially suited to Xplorer V1, Switcher HP V1 and V2 models. Perfect for cruising and daily travel, these wheels combine responsiveness and durability.
They deliver strong torque from the start, making acceleration easier, and provide a dynamic regain after each turn. In addition, they help maximize the range of your electric skateboard, for longer and more enjoyable sessions.
Kit contents
- 4 red urethane wheels 90 mm – offer smooth roll, responsive acceleration and good range
- 2 belts 285 mm – ensure transmission between motor and wheel in a Street configuration
- 2 Drive Gear 35T – compatible with CloudWheel wheels, for optimized traction
- 6 608RS bearings without flange and 2 608RS bearings with flange – sealed high-performance bearings for smooth and durable rotation
Pack contents
90mm red urethane wheel for electric skateboard. Exclusive color to personalize your board.
A lightweight, efficient wheel for urban cruising
Smooth roll, responsive acceleration and optimal range
Designed for cruising and daily commutes, the 90 mm red urethane wheel combines responsiveness, comfort and durability. They guarantee good grip and smooth ride feel.
This wheel provides high torque at start, good exit-of-turn acceleration, and helps optimize your board's range.
To help you choose the wheel or tire that best matches your riding style, consult our complete comparison of all available models.
Technical specifications
- Diameter : 90 mm
- Durometer : 80A
Compatible models
- Xplorer V1
- Switcher V1 / V2 / V3
- Switcher HP V1 / V2
Contents
- 1 Wheel
Note: Sold individually. Adjust the quantity of units according to the number of wheels you want to replace.
If you want to view the version of these wheels compatible with the Cruz V2 or the Curve V4, click here.
285mm belt for electric skateboard in a street configuration. Reinforced HTD 5M drive belt.
Replace your belt to optimize your board's performance
An essential element for a smooth and responsive ride
The 285 mm belt connects the motor to the 90 mm urethane wheel, ensuring a consistent and loss-free energy transfer.
A simple but essential replacement
Subject to friction and tension variations, a belt can wear or lose effectiveness over rides. Replacing it preserves performance and prevents slipping.
Configuration
This belt is used in the following configuration for Xplorer V1 and Switcher HP V1, V2:
-
90 mm urethane wheels
Compatible models
- Xplorer V1
-
Switcher HP V1 / V2
Contents
- 1 Belt 285 mm
Note: Sold individually. Adjust the quantity according to the number of wheels to equip. Check your wheel diameter to ensure compatibility.
Drive Gear 35-tooth pulley for electric skateboard. Compatible with standard longboard wheels.
Replace your Drive Gear to keep a smooth and responsive street setup
An essential component for performance
The Drive Gear 35T ensures quick and direct energy transfer between the motor and the 90 mm urethane wheel, offering smooth acceleration and controlled speed.
Replace the drive gear to optimize performance
With natural wear from friction, damaged drive gear teeth can cause torque loss, noise or premature belt wear.
Configurations
For Switcher V1 / V2 / V3
-
90 mm urethane wheels
-
Drive Gear 35T
-
Belts 250 mm
-
608RS bearings without flange & with flange
For Switcher HP V1 / V2 and Xplorer V1
-
90 mm urethane wheels
-
Drive Gear 35T
-
Belts 285 mm
-
608RS bearings without flange & with flange
Compatible models
- Xplorer V1
- Switcher V1, V2, V3
- Switcher HP V1, V2
Contents
- 1 Drive Gear 39T
Note: Sold individually. Remember to adjust the quantity according to the number of drive gears to replace. Check your wheel diameter and belt size to ensure compatibility.
608RS bearing without flange for electric skateboard. Standard sealed ball bearing.
Replace your bearing to preserve your board's performance
An essential part of your skate
The 608RS bearing without flange (22 x 8 x 6 mm) is essential to maintain smooth rotation between the wheel and the truck. Designed for many Evo-Spirit electric skateboard models, it ensures efficient energy transfer and better stability, whatever your riding style.
Maintain your feel with regular replacement
Over time, bearings wear and lose efficiency. By replacing them regularly, you avoid excess friction, extend your board's lifespan and keep a smooth roll, even on long trips.
Technical specifications
- Dimensions : 22 x 8 x 6 mm
- Configurations :
- Switcher V1 / V2 / V3 equipped with 90 mm urethane wheels or SoftWheel / CloudWheel wheels
- Xplorer V1, Switcher HP V1 / V2 equipped with 90 mm urethane wheels or SoftWheel / CloudWheel wheels
- Xplorer V1 equipped with 6-inch, 7-inch, 8-inch tires, 130 mm urethane wheel or 140 mm airless and the CNC rim
- Cruz V2, Curve V3 / V4
Compatible models
- Xplorer V1
- Switcher V1 / V2 / V3
- Switcher HP V1 / V2
- Cruz V2
- Curve V3 / V4
Contents
- 1 608RS Bearing
Note: Sold individually. Adjust the quantity according to the number of wheels to equip. Check your wheel diameter to ensure compatibility.
608RS bearing with flange for electric skateboard. Sealed ball bearing with integrated flange.
Replace your bearing to preserve your board's performance
An essential part of your electric skate
The 608RS bearing with flange (22 x 8 x 6 mm) is specifically designed for street configurations with 90 mm urethane wheels on Xplorer V1, Switcher V1 / V2 / V3 and Switcher HP V1 / V2 models. Thanks to its integrated flange, it ensures optimal bearing fit (installed on the drive gear side) and smooth rotation, essential to guarantee your electric skateboard's performance.
Maintain your feel with regular replacement
During rides, bearings can be subjected to mechanical stress, vibrations and moisture intrusion. Replacing worn bearings restores efficient, quiet roll and optimized range, while protecting other components.
Technical specifications
- Dimensions : 22 x 8 x 6 mm
- Configurations :
- Xplorer V1 equipped with 90 mm urethane wheels
- Switcher V1 / V2 / V3 equipped with 90 mm urethane wheels
- Switcher HP V1 / V2 equipped with 90 mm urethane wheels
Compatible models
- Xplorer V1
- Switcher V1 / V2 / V3
- Switcher HP V1 / V2
Contents
- 1 608RS Bearing With Flange
Note: Sold individually. Adjust the quantity according to the number of wheels to equip. Check your wheel diameter to ensure compatibility.
