Transform your board for the city with comfort and performance
This Street SoftWheel conversion kit is designed for Xplorer V1 as well as Switcher HP V1 and V2, offering an ideal solution to adapt your skateboard to high-performance urban use. It effectively converts your all-terrain setup into a smooth, comfortable Street setup, perfectly suited to paved surfaces.
Easy to install, this pack includes all the components needed to equip your board with parts specifically engineered for city riding. It guarantees better responsiveness and improved acceleration, while preserving the robustness and durability of your equipment.
Kit contents
- 4 SoftWheel 105 mm wheels – for better grip and good responsiveness on the road
- 2 belts 295 mm – ensure transmission between motor and wheel in a Street configuration
- 2 Drive Gear CloudWheel 39T – compatible with SoftWheel wheels, for optimized traction
- 8 608RS shielded bearings without flange and 2 6003RS bearings – high-performance sealed bearings for smooth, durable rotation
Pack contents
SoftWheel 105mm urban wheel for electric skateboard. High quality polyurethane, grip and comfort.
Ride with comfort on irregular urban roads
An excellent compromise between performance and comfort
The SoftWheel 105 mm wheels offer a comfortable alternative to classic urethane wheels. Their generous diameter and compliant rubber effectively absorb road imperfections, such as cobbles, cracks, and fine gravel. Ideal for urban longboard use, on asphalt or bike paths.
Note : Their relatively small diameter can be problematic on very flexible boards with low ground clearance, with a risk of battery pack rubbing, notably on the Xplorer V2.
To help you choose the wheel or tire that best matches your riding style, check our full comparison of all available models.
Technical specifications
- Diameter : 105 mm
- Width : 65 mm
- Durometer : 78A
- Weight : Approximately 420 g per wheel
Compatible models
- Xplorer V2
- Xplorer V1
- Switcher V1 / V2 / V3
- Switcher HP V1 / V2
Requires a conversion kit for installation.
Contents
- 1 Wheel
Note: Sold individually. Adjust quantity according to the number of wheels to replace.
295mm belt for electric skateboard in Street configuration. Reinforced HTD 5M transmission belt.
Replace your belt to optimize your board's performance
A key element for smoothness and power
The 295 mm belt ensures the direct link between motor and wheel, guaranteeing a smooth and precise transfer of energy. It is essential to maintain speed, torque and acceleration in top condition on your Street setup.
A simple but essential replacement
Over time, belts wear due to friction, mechanical stress and temperature variations. Regular replacement preserves a smooth transmission without energy loss, and prevents jerks, slipping or seizing caused by a damaged belt. It is also a cost-effective way to protect your motors and drive gear.
Configuration
This belt fits the following configuration for Xplorer V1 and Switcher HP V1 / V2:
-
CloudWheel or SoftWheel wheels
Compatible models
- Xplorer V1
-
Switcher HP V1 / V2
Contents
- 1 Belt 295 mm
Note: Sold individually. Adjust quantity according to the number of wheels to equip. Check your wheel diameter to ensure compatibility.
Drive Gear CloudWheel 39-tooth pulley for electric skateboard. Compatible with CloudWheel Donut wheels.
Replace your Drive Gear for a smooth, responsive street setup
Precise, adapted transmission
The 39T CloudWheel Drive Gear enables optimal transfer of motor power to SoftWheel or CloudWheel wheels. It is engineered to maintain smooth acceleration, immediate response and a controlled glide feel, even at high speed.
Change your drive gear to keep consistent performance
Subject to wear, damaged drive gear teeth can cause torque loss, noise or premature belt wear. This 39-tooth model is designed to restore your Street configuration easily to its original state.
Configurations
For Switcher V1 / V2 / V3
-
SoftWheel 105 mm or CloudWheel 110 mm wheels
-
Drive Gear 39T
-
Belts 265 mm
-
608RS bearings without flange & 6003RS
For Xplorer V1 and Switcher HP V1 / V2
-
SoftWheel 105 mm or CloudWheel 110 mm wheels
-
Drive Gear 39T
-
Belts 295 mm
-
608RS bearings without flange & 6003RS
Compatible models
- Xplorer V1
- Switcher V1, V2, V3
- Switcher HP V1, V2
Contents
- 1 Drive Gear 39T
Note: Sold individually. Remember to adjust quantity according to the number of drive gears to replace. Check your wheel diameter and belt size to ensure compatibility.
608RS bearing without flange for electric skateboard. Standard sealed ball bearing.
Replace your bearing to preserve your board's performance
An essential part of your skate
The 608RS bearing without flange (22 x 8 x 6 mm) is essential to maintain smooth rotation between the wheel and the truck. Designed for many Evo-Spirit electric skateboard models, it ensures efficient energy transfer and improved stability, whatever your riding style.
Preserve your feel with regular replacement
Over time, bearings wear and lose efficiency. Replacing them regularly prevents excessive friction, extends your board's lifespan and maintains a smooth glide, even on long rides.
Technical specifications
- Dimensions : 22 x 8 x 6 mm
- Configurations :
- Switcher V1 / V2 / V3 fitted with 90 mm urethane wheels or SoftWheel / CloudWheel wheels
- Xplorer V1, Switcher HP V1 / V2 fitted with 90 mm urethane wheels or SoftWheel / CloudWheel wheels
- Xplorer V1 fitted with 6-inch, 7-inch, 8-inch tires, 130 mm urethane wheel or 140 mm airless and CNC rim
- Cruz V2, Curve V3 / V4
Compatible models
- Xplorer V1
- Switcher V1 / V2 / V3
- Switcher HP V1 / V2
- Cruz V2
- Curve V3 / V4
Contents
- 1 608RS bearing
Note: Sold individually. Adjust quantity according to the number of wheels to equip. Check your wheel diameter to ensure compatibility.
6003RS bearing for electric skateboard. Sealed ball bearing for Evo-Spirit wheels and pulleys.
Replace your bearing to preserve your board's performance
An essential part of your skate
The 6003RS bearing (35 x 17 x 10 mm) is designed to fit the rims of CloudWheel or SoftWheel wheels on several Evo-Spirit models: Switcher V1, V2, V3, Switcher HP V1, V2 and Xplorer V1. It provides precise axle support, reduces friction and improves power transmission between the motor and the wheel. This robust component is essential to guarantee a smooth ride, even on degraded asphalt or during sharp turns.
Preserve your feel with regular replacement
Exposed to wear, moisture and vibrations, bearings lose effectiveness over sessions. Replacing them on time helps maintain glide, stability and responsiveness of your board while extending the life of your transmission system.
Technical specifications
- Dimensions: 35 x 17 x 10 mm
- Configurations :
- Switcher V1, V2, V3 fitted with CloudWheel or SoftWheel wheels
- Xplorer V1, Switcher HP V1, V2 fitted with CloudWheel or SoftWheel wheels
Compatible models
Xplorer V1
Switcher V1, V2, V3
Switcher HP V1, V2
Contents
- 1 6003RS bearing
Note: Sold individually. Adjust quantity according to the number of wheels to equip. Check your wheel diameter to ensure compatibility.
