Responsiveness and comfort on mixed terrain
This all-terrain conversion kit 6-inch is designed for riders who want a dynamic ride with excellent road holding.
This kit is compatible with standard truck and suitable for any rider.
The 150 mm inflatable tire (6-inch) combines agility, grip and shock absorption. Its reduced diameter and width ensure a lively feel, ideal for committed carves, lightweight setups or mixed terrain. Its hard rubber construction guarantees good longevity, even in daily use on uneven paths.
Kit contents
- 4 inflatable tires 6-inch / 150 mm – combine agility, grip and shock absorption
- 4 CNC rims – (2 front, 2 rear) robust and precise, suited to the Xplorer V2 all-terrain configuration
- 4 inner tubes 6-inch / 150 mm – provide good damping and effective shock absorption
- 2 belts 390 mm – ensure reliable transmission between motor and wheel
- 8 bearings 6900RS and 2 bearings 6000RS – high-performance sealed bearings for smooth rotation
Pack contents
Inflatable tire 6-inch (150mm) all-terrain for electric skateboard. Comfort and grip on uneven surfaces.
6-inch inflatable tire ideal for all terrain
Master your rides with agility and comfort
The 150 mm All-Terrain inflatable tire combines agility, stability and shock absorption. Designed for riders who seek a responsive ride without sacrificing comfort, it provides very good grip on degraded roads, dirt tracks or gravel.
Its 150 mm diameter and 50 mm width offer a lively behavior, ideal for lightweight setups or precise carves. Its rubber construction ensures good longevity, even in mixed use.
To help you choose the wheel or tire that best matches your riding style, consult our complete comparison of all available models.
Technical specifications
- Diameter: 150 mm
- Width: 50 mm
- Structure: Inflatable Tire
- Material: Reinforced rubber
Compatible models
- Xplorer V2
- Xplorer V1
- Switcher HP V2 (originally sold with 8-inch)
Contents
- 1 Tire
Note: Sold individually. Adjust quantity according to the number of tires to replace.
Recommended pressure
- All-terrain / trails: 1.7 bars (25 PSI)
- Mixed urban / trails: 2.1 bars (30 PSI)
- 100% urban / asphalt: 2.4 bars (35 PSI)
- Maximum permitted pressure: Refer to the marking on the tire sidewall (100 kPa = 1.0 bar)
Front CNC aluminium rim for Xplorer V2. Genuine Evo-Spirit part machined with precision.
An essential part for the Xplorer V2 setup
This front aluminium CNC rim is specifically designed for the Xplorer V2 Evo-Spirit. It is made of two aluminium parts with bearings mounted on a 10 mm axle, ensuring smooth rotation and high robustness.
Two-part aluminium CNC rim
Integrated bearings (10 mm axle)
Color: aluminium
Compatibility
- Xplorer V2 with 6, 7, 8-inch inflatable tires
Contents
- 1 Front Rim
Rear CNC aluminium rim for Xplorer V2. Genuine Evo-Spirit part machined with precision.
An essential part for the Xplorer V2 setup
This rear aluminium CNC rim is designed for the Xplorer V2 Evo-Spirit. Composed of two parts, it integrates a drive gear directly into the structure, for reliable transmission and simplified assembly.
Two-part aluminium CNC rim
Integrated drive gear
Bearings included (10 mm axle)
Color: aluminium
Compatibility
- Xplorer V2 with 6, 7, 8-inch inflatable tires
Contents
- 1 Complete rear rim with drive gear
Inner tube 6-inch (150mm) for all-terrain electric skateboard. Angled valve, compatible with Evo-Spirit inflatable tires.
Easily replace the inner tube of your 6-inch tire
A simple replacement for more comfort
This 6-inch / 150 mm inner tube is designed to replace your worn or punctured tube. Ideal to restore original comfort on your urban trips or all-terrain sessions.
Preserve your ride performance
Changing a worn or punctured inner tube brings back the original comfort and smoothness of your electric skate. A healthy inner tube ensures optimal shock absorption, better grip, and perfect stability on all types of terrain. Check pressure regularly to extend its life and enjoy a ride as smooth as the first day.
Compatible models
- Xplorer V2
- Xplorer V1
- Switcher HP V2
(only with 6-inch / 150 mm inflatable tires)
Contents
- 1 inner tube 6-inch / 150 mm (tire not included)
Note: this inner tube is sold individually. If you want to change several, adjust the quantity according to the number of inner tubes to replace.
390mm belt for electric skateboard in all-terrain configuration. Reinforced HTD 5M transmission belt.
Replace your belt to optimise your board's performance
A key element for smoothness and power
This 390 mm belt is specially designed to ensure smooth transmission of power between the motor and the 175 mm wheel of the Xplorer V2. Ideal for demanding all-terrain riders.
A simple but essential replacement
Over time, belts wear due to friction, mechanical tensions and temperature variations. Regular replacement helps maintain smooth transmission, avoid power loss, and prevent jerks, slipping or locking caused by a damaged belt. It is also a cost-effective way to protect your motors and drive gear.
Configuration
This belt is used on the Xplorer V2 in the following configuration:
- 175 mm wheels with original aluminium CNC rim
Compatible model
- Xplorer V2 with 175 mm wheels and original aluminium CNC rims
Contents
- 1 Belt 390 mm
Note: Sold individually. Adjust quantity according to the number of wheels to equip. Check your wheel diameter to ensure compatibility.
6000RS bearing for electric skateboard. Sealed ball bearing for Evo-Spirit wheels and pulleys.
Replace your bearing to preserve your board's performance
An essential part of your skate
The 6000RS bearing (26 x 10 x 8 mm) is designed for CNC rims on Xplorer V2 models in all-terrain configuration. It plays a central role in ride smoothness, ensuring precise rotation and efficient power transmission between the motor and the wheel. Thanks to its robust design, it reduces friction between the axle and the wheel, optimises range and guarantees a stable ride, even on demanding terrain.
Replace your bearings for consistently smooth rolling
Subject to mechanical stress, moisture and debris, bearings naturally wear over time. Regular replacement helps maintain your board's performance, avoid efficiency loss and extend the lifespan of your mechanical components.
Technical specifications
- Dimensions : 26 x 10 x 8 mm
- Configuration : Each pack contains 1 6000RS bearing, to be used on the drive gears of the aluminium CNC rims.
Complete with 8 6900RS bearings for the remaining wheels.
Compatible model
- Xplorer V2
Contents
- 1 6000RS Bearing
Note: Sold individually. Adjust quantity according to the number of wheels to equip. Check your wheel diameter to ensure compatibility.
See 6900RS bearings6900RS bearing for electric skateboard. Sealed ball bearing for Evo-Spirit wheels and pulleys.
Replace your bearing to preserve your board's performance
An essential part of your skate
The 6900RS bearing (22 x 10 x 6 mm) plays a key role in the proper functioning of the Xplorer V2. It ensures smooth rotation, efficient power transmission and a stable ride, even in demanding conditions. Its robust construction limits friction between the axle and the wheel, which improves range and durability of your board.
Replace your bearings for consistently smooth rolling
Over time, bearings are exposed to shocks, moisture and mechanical wear. Regular replacement helps retain ride smoothness, optimise energy efficiency and extend the life of your setup. A well-maintained bearing means a more precise, faster and consistently enjoyable board.
Technical specifications
- Dimensions : 22 x 10 x 6 mm
- Street configuration:
Plan for 10 6900RS bearings for a complete pack.
- Configuration with aluminium CNC rims:
Plan for 8 6900RS bearings + 2 6000RS bearings (for the drive gear).
Compatible model
- Xplorer V2
Contents
- 1 6900RS Bearing
Note: Sold individually. Adjust quantity according to the number of wheels to equip. Check your wheel diameter to ensure compatibility.
See 6000RS bearings